Upc A; Upc E - Psion Teklogix 7527C-G2 User Manual

Add/Remove Data
Refer to “"Add/Remove Data”" on page D-9 for details.
D.2.9

UPC A

Enabled
Set this parameter to on to enable “"UPC A”".
UPC-A Check Digit
If you enable this parameter, the check digit is included with the decoded bar code data.
UPC-A Preamble
When you double-tap on this parameter, a dialog box is displayed where you can choose one
of three options for lead-in characters for UPC-A symbols transmitted to the host device:
System Char –– system character transmitted with the data, Country code and System Char ––
both the country code (“"0”" for USA) and system character are transmitted with the or None
–– no preamble is transmitted. The lead-in characters are considered part of the symbol.
Add/Remove Data
Refer to “"Add/Remove Data”" on page D-9 for details.
D.2.10

UPC E

Enabled UPC-E
Set this parameter to on to allow “"UPC E”" bar code scans.
Enabled UPC-E1
Set this parameter to on to allow “"UPC-E1”" (zero suppressed) bar code scans.
UPC-E And UPC-E1 Check Digit
If you enable one or both of these parameters, a check digit is included with the decoded bar
code data.
UPC-E And UPC-E1 Preamble
When you double-tap on one of these parameters, a dialog box is displayed where you can
choose one of three options for lead-in characters for UPC-E and UPC-E1 symbols transmit-
ted to the host device: System Char –– system character transmitted with the data, Country
code and System Char –– both the country code (“"0”" for USA) and system character are
3
WORKABOUT PRO with Windows Mobile 6.1 User Manual
Appendix D: Bar Code Settings
UPC A
D-11