Psion Teklogix 7527C-G2 User Manual page 270

Chapter 7: Peripheral Devices & Accessories
Attaching The Pistol Grip
The pistol grip is attached to the four threaded inserts on the back of the WORKABOUT
3
PRO . Four Phillips head screws are provided with this accessory.
Note: Prior to installation, make sure the trigger mechanism is securely snapped into the
pistol grip body and that the trigger operates properly.
•• Position the pistol grip so that it fits snugly over the back of the unit and the holes in the
pistol grip are aligned with the threaded inserts on the back of the WORKABOUT
PRO
•• Tighten the screws to a torque of 3 lbs-in (3kgf-cm) to secure the pistol grip in place.
•• Insert the stylus in the base of the pistol grip.
252 WORKABOUT PRO
3
.
3
with Windows Mobile 6.1 User Manual