Psion Teklogix 7527C-G2 User Manual page 37

To configure encryption:
•• Tap on the Encryption drop-down menu, and choose the appropriate type of encryption
–– Manual WEP, Auto WEP, WPA PSK, WPA TKIP, WPA2 PSK, WPA2 AES, CCKM
TKIP, CKIP Manual or CKIP Auto.
If you choose Manual WEP, WPA PSK or WPA2 PSK:
•• Tap on the WEP/PSK Keys button. For Manual WEP, choose up to four static WEP
keys. For PSK, type an ASCII passphrase or hex PSK.
•• Configure any other settings that are supplied by the network administrator for the SSID
to which you will associate.
•• Make certain that you tap on Commit following each change.
Once you’'ve completed the configuration:
•• Tap the Main tab. Tap on the Active Profile drop-down menu –– your new profile will
be listed in the drop-down menu.
When you tap on the profile you created, the 802.11b/g radio module attempts to connect to
the network using the following steps:
1. Associate with SSID.
2. Authenticate to network.
3. If EAP authentication is being used, derive dynamic encryption keys.
4. If DHCP is being used by the network, obtain an IP address.
If the 802.11b/g is not connecting properly:
•• Tap on the Status tab.
The Status dialog box lists the IP and MAC address, and indicates the current state of the
radio, the signal strength, channel and so on.
You can also use the Status screen for DHCP renewal and ICMP Echo Requests (Pings).
Important: For details about the Status dialog box, refer to“"Status Tab”" on page A-7 in
Appendix A: “"Summit Client Utility (SCU)”".
3
WORKABOUT PRO with Windows Mobile 6.1 User Manual
Chapter 2: Basic Checkout
Using the SCU to Connect to the WLAN
19