Psion Teklogix 7527C-G2 User Manual page 395

Low Power Timeout
To extend laser life, you can select the length of time the scanner remains active following a
successful decode. The scanner wakes from low power mode when a bar code is scanned –– a
successful decode restores normal blinking.
When you double-tap on this parameter, a dialog box is displayed in which you can choose a
value of 30 sec, 1 min, 2 min or 3 min.
Note: This parameter is only used if the Trigger Mode has been set to Continuous On and
the WORKABOUT is mounted in a fixed position; otherwise, ‘'Low Power Timeout’'
is not used.
Add AIM ID Prefix
The AIM ID (Association for Automatic Identification and Mobility) is an international bar
code identifier. When this parameter is enabled, the AIM ID is inserted at the beginning of
the decoded bar code.
Prefix Exception1:, 2: And 3:
This parameter works in conjunction with the AIM ID parameter. When AIM ID is enabled,
an AIM ID prefix is added to every bar code. The Prefix Exception parameter allows you to
switch off AIM ID for up to three bar codes.
Double-tapping on Prefix Exception 1:, Prefix Exception 2: or Prefix Exception 3: displays a
list of bar codes.
When a bar code in this list is highlighted, an AIM ID prefix is not added to the selected bar
code. (For a description of AIM ID, refer to “"Add AIM ID Prefix”" on page D-44.)
3
WORKABOUT PRO with Windows Mobile 6.1 User Manual
Appendix D: Bar Code Settings
Advanced Options –– Decoded (HHP)
D-21