Removing A Custom Preset; Configuring The Bar Code Decoding Camera Presets - Psion Teklogix IKON RUGGED PDA 7505-BTMC75 User Manual

- Highlight the parameter and then press the [SPACE] key, or double-click on the
parameter. Either method toggles between the two available values.
• When you've completed your edits, tap on OK.
The parameter list is displayed; the new value for the changed parameter is shown.
• Tap on OK to exit to the preset list and save the changes.
C.3.7

Removing A Custom Preset

• Highlight the custom preset you want to delete, and tap on the Remove button.
A window is displayed warning you that you are about to remove a preset.
• Tap on Yes to remove the preset or No to cancel the operation.
C.4

Configuring The Bar Code Decoding Camera Presets

To configure the bar code decoding camera presets:
• Tap on Start>Settings>System tab.
• Tap on the Barcoding tab.
Figure C.2 Bar Code Presets
This window lists all the presets, both predefined and the custom. Presets are identified as
follows:
• Predefined presets are marked as read-only. For a description, review "Predefined Pre-
sets" on page C-2.
• Custom presets are marked as read and write.
• One preset – either predefined or custom – is marked as active.
Ikôn Rugged PDA (Windows Mobile 6.1) User Manual
Appendix C: Teklogix Imagers Applet
Removing A Custom Preset
C-9