Addendum Separator
"Addendum Separator" is a space that is added between the UPC E bar code and the Add-on
code/Addenda. When this parameter is set to on, the scanner does not accept the main bar
code without an addendum.
Add/Remove Data
Refer to "Add/Remove Data" on page D-9 for details.
D.3.10 UPC/EAN Shared Settings
Extended Coupon Code
This parameter specifies whether or not the imager will read only UPC-A/EAN-13 bar
codes that have addenda.
Note: The 2 or 5 digit addenda must be turned on/off, depending on the desired behavior.
D.3.11 Code 93
Enabled
Set this parameter to on to enable "Code 93".
Minimum And Maximum Length
The length of a code refers to the number of characters (i.e., human readable characters), in-
cluding check digit(s). Double-tapping on these parameters displays a screen in which you
can set the minimum and maximum allowable code lengths – 0 to 80.
Length Restriction
Refer to "Length Restriction" on page D-8 for details.
Add/Remove Data
Refer to "Add/Remove Data" on page D-9 for details.
D.3.12 Codabar
Enabled
Set this parameter to on to enable "Codabar".
3
WORKABOUT PRO
with Windows Mobile 6.1 User Manual
Appendix D: Bar Code Settings
UPC/EAN Shared Settings
D-27