Upca; Upc E - Psion Teklogix 7527C-G2 User Manual

Appendix D: Bar Code Settings

UPCA

D.4.7 UPCA
Enabled
Set this parameter to on to enable “"UPC A”" bar code scanning recognition.
Transmit Check Digit
If the check digit is to be transmitted with the data, this parameter must be enabled.
Transmit Number System
If this parameter is enabled, the number system digit is transmitted with the decoded bar
code data.
Convert To EAN 13
If this parameter is enabled, a UPC A bar code is converted to EAN 13.
Add/Remove Data
Refer to “"Add/Remove Data”" on page D-9 for details.
D.4.8

UPC E

Enabled
Set this parameter to on to enable “"UPC E”".
Enable UPC-E1
Set this parameter to on to allow “"UPC-E1”" (zero suppressed) bar code scans.
Transmit Check Digit
If the check digit is to be transmitted with the data, this parameter must be enabled.
Transmit Number System
If this parameter is enabled, the number system digit is transmitted with the decoded bar
code data.
Convert To UPC-A
This parameter converts UPC E (zero suppressed) decoded data to UPC A format before
transmission. After conversion, data follows UPC A format and is affected by UPC A pro-
gramming selections (e.g. Check Digit).
D-48 WORKABOUT PRO
3
with Windows Mobile 6.1 User Manual