Chapter 7: Peripheral Devices & Accessories
The Trigger Back Plate Kit With Flush Mount Pistol Grip
Installing The Flush Mount Pistol Grip
The Flush Mount Pistol Grip, model WA6103, is intended for use with second-generation
WORKABOUT PRO
Back Plate installed. Review the first few paragraphs at the beginning of "The Trigger Back
Plate Kit With Flush Mount Pistol Grip" on page 253 for a list of compatible
scanners/imagers.
Important: Back up any data in RAM before you begin; data are erased when the inter-
•
If your unit is using AC power, disconnect it.
•
Remove the battery cover and battery pack. Switch off the internal power – the switch is
located inside the battery compartment.
•
Remove the screw-on cap, if present, from the switch in the middle of the back plate.
256
WORKABOUT PRO
3
units (models 7527C-G2 and 7527S-G2) which have the Trigger
nal power of the WORKABOUT PRO
Battery
Screws (4 X)
3
with Windows Mobile 6.1 User Manual
3
is turned off.
Battery Pack Cover
Switch