Selecting A Camera; Setting The Active Preset - Psion Teklogix 7527C-G2 User Manual

Figure C.2 Bar Code Presets
This window lists all the presets, both predefined and the custom. Presets are identified as
follows:
•• Predefined presets are marked as read-only. For a description, review “"Predefined Pre-
sets”" on page C-2.
•• Custom presets are marked as read and write.
•• One preset –– either predefined or custom –– is marked as active.
Note: The top portion of the window displays the bar code decoding camera presets.
The top port of the window displays the bar code decoding camera presets.
C.4.1

Selecting A Camera

If your WORKABOUT has more than one built-in camera, one camera must be selected for
configuration. To select a camera:
•• Tap on the Camera Presets drop-down menu to view the camera options.
•• Choose a camera –– specifically, Front Imager which is located at the top of the unit.
C.4.2

Setting The Active Preset

An active preset has an A to the right; in Figure C.2 on page page C-9, the active preset is
Defaults. To set an active preset:
•• Highlight the preset, and tap on the Activate button.
3
WORKABOUT PRO with Windows Mobile 6.1 User Manual
Appendix C: Teklogix Imagers Applet
Selecting A Camera
C-9