Psion Teklogix 7527C-G2 User Manual page 404

Appendix D: Bar Code Settings
Interleaved 2 of 5
Check Digits
Double-tapping on this parameter displays a dialog box in which you can choose One Check
Digit or Two check digits.
If this parameter is set to One Check Digit, it is assumed that the last digit is a check digit. If
it is set to Two Check Digits, it is assumed that the last two digits are check digits.
Minimum And Maximum Length
The length of a code refers to the number of characters (i.e., human readable characters), in-
cluding check digit(s). Double-tapping on these parameters displays a screen in which you
can set the minimum and maximum allowable code lengths –– 1 to 80.
Length Restriction
Refer to “"Length Restriction”" on page D-8 for details.
Add/Remove Data
Refer to “"Add/Remove Data”" on page D-9 for details.
D.3.15 Interleaved 2 of 5
Enabled
Set this parameter to on to enable “"Interleaved 2 of 5”".
Check Digit
When this parameter is set to Validate only, the integrity of a symbol is checked to ensure
that it complies with specified algorithms.
If “"Check Digit”" is set to Validate and Transmit, the check digit is validated and transmitted
with the data.
Setting this parameter to None disables this function.
Minimum And Maximum Length
The length of a code refers to the number of characters (i.e., human readable characters), in-
cluding check digit(s). Double-tapping on these parameters displays a screen in which you
can set the minimum and maximum allowable code lengths –– 1 to 80.
Length Restriction
Refer to “"Length Restriction”" on page D-8 for details.
D-30 WORKABOUT PRO
3
with Windows Mobile 6.1 User Manual