Psion Teklogix 7527C-G2 User Manual page 381

Convert To Code 32
Note: “"Code 39”" must be enabled in order for this parameter to function.
Setting this parameter to on allows the scanner to convert the bar code from “"Code 39”"
to “"Code 32”".
Code 32 Prefix
Note: “"Convert to Code 32”" must be enabled in order for this parameter to function.
When this parameter is enabled, the prefix character “"A”" is added to all “"Code 32”"
bar codes.
Set Length L1 And Set Length L2
Lengths for “"Code 39”" can be set for Any length, Length within a range, One discrete length
or Two discrete lengths. The length of a code refers to the number of characters (i.e., human
readable characters), including check digit(s).
Double-tapping on this parameter displays a dialog box labelled Set Code Lengths where
you can define the code length that will be decoded by your scanner.
Choosing One discrete length allows you to decode only those codes containing a selected
length. Choosing Two discrete lengths allows you to decode only those codes containing two
selected lengths. Length within a range allows you to decode a code type within a specified
range from 1 to 55.
3
WORKABOUT PRO with Windows Mobile 6.1 User Manual
Appendix D: Bar Code Settings
Code 39
D-7