Upc E Settings - Psion Teklogix 7527C-G2 User Manual

Appendix D: Bar Code Settings

UPC E Settings

Addendum Required
When this parameter is set to on, the scanner does not accept the main bar code without an
addendum.
Addendum Separator
“"Addendum Separator”" is a space that is added between the UPC A bar code and the Add-
on code/Addenda. When this parameter is set to on, the scanner does not accept the main bar
code without an addendum.
Add/Remove Data
Refer to “"Add/Remove Data”" on page D-9 for details.
D.3.9 UPC E Settings
Enabled
Set this parameter to on to enable “"UPC E”".
Enabled UPC-E1
Set this parameter to on to allow “"UPC-E1”" (zero suppressed) bar code scans.
Expand
This parameter expands the UPC E code to a 12 digit UPC-A format.
Check Digit
If you enable this parameter, a check digit is included with the decoded bar
code data.
Transmit Number System
If this parameter is enabled, the number system digit is transmitted with the decoded bar
code data.
Addendum Add-on 2 And Addendum Add-on 5
An addendum is a separate bar code, supplementary to the main bar code.
Enabling these parameters defines the length of the addendum bar code to either
2 or 5 characters.
Addendum Required
When this parameter is set to on, the scanner does not accept the main bar code without an
addendum.
D-26 WORKABOUT PRO
3
with Windows Mobile 6.1 User Manual