Removing A Custom Preset - Psion Teklogix IKON RUGGED 7505-BTSDCMHC25 User Manual

Chapter 5: Configuration
Configuring The Image Capture Presets
4. Scroll through the parameter list until you reach the parameter that you want
to change.
5. For a parameter that can take a range of values:
i. Select the parameter and then press the [S
ii. A dialog box —containing the valid range of values for the parameter and the current
setting—similar to the following opens:
iii. Type the new value for the parameter into the box.
6. For a parameter that toggles between two values:
• Select the parameter and then press the [S
• Double-click the parameter.
7. When you have completed all the changes, do one of the following:
• Click OK to exit to the parameter list and save the changes, or
• Click the Close button to exit to the parameter list without saving the changes.
8. The parameter list is displayed; the new value for the changed parameter is shown.
9. When you have completed all the changes, do one of the following:
• Click OK to exit to the preset list and save the changes, or
• Click the Close button to exit to the preset list without saving the changes.
5.13.1.6

Removing A Custom Preset

To remove a custom preset do the following:
1. Select a custom preset.
2. Click Remove.
144 Ikôn Rugged PDA (Windows CE 5.0) User Manual
] key, or double-click the parameter.
PACE
] key, or
PACE