Trioptic Code - Psion Teklogix 7527C-G2 User Manual

Full ASCII
If this parameter is enabled, the characters +, %, and / are used as escape characters. The
combination of an escape character and the next character is converted to an equivalent
ASCII character.
Length Restriction
Refer to “"Length Restriction”" on page D-8 for details.
Add/Remove Data
Refer to “"Add/Remove Data”" on page D-9 for details.
D.3.4

Trioptic Code

This code is used for labelling magnetic storage media.
Note: If you are scanning Code 32 Pharmaceutical codes, Trioptic Code must be off.
Enabled
Setting this parameter to on enables “"Trioptic Code”".
Length Restriction
Refer to “"Length Restriction”" on page D-8 for details.
Add/Remove Data
Refer to “"Add/Remove Data”" on page D-9 for details.
D.3.5 Code 128
Enabled
Setting this parameter to on enables “"Code 128”".
ISBT Concatenation
These codes are not concatenated by default. You need to set this parameter to on to send
concatenated code.
3
WORKABOUT PRO with Windows Mobile 6.1 User Manual
Appendix D: Bar Code Settings
Trioptic Code
D-23