Ean 8 - Psion Teklogix 7527C-G2 User Manual

Minimum Length
Minimum lengths for the bar code can be set from 0 to 255. The length of a code refers to
the number of characters (i.e., human readable characters), including check digit(s).
Length Restriction
Refer to “"Length Restriction”" on page D-8 for details.
Add/Remove Data
Refer to “"Add/Remove Data”" on page D-9 for details.
D.4.5 EAN 13
Enabled
Set this parameter to on to enable “"EAN 13”".
ISBN Conversion
When this parameter (International Standard Book Number) is enabled, the first 3 characters
(‘'978’') are ignored and the checksum (0.9, ‘'X’') is calculated on the remaining characters.
Transmit Check Digit
If the check digit is to be transmitted with the data, this parameter must be enabled.
Add/Remove Data
Refer to “"Add/Remove Data”" on page D-9 for details.
D.4.6

EAN 8

Enabled
Set this parameter to on to enable “"EAN 8”".
Transmit Check Digit
If the check digit is to be transmitted with the data, this parameter must be enabled.
Convert To EAN 13
If this parameter is enabled, an EAN 8 bar code is converted to EAN 13.
Add/Remove Data
Refer to “"Add/Remove Data”" on page D-9 for details.
3
WORKABOUT PRO with Windows Mobile 6.1 User Manual
Appendix D: Bar Code Settings
EAN 13
D-47