Ricoh MP C6502 series Operation Manual page 566

8. Troubleshooting
• Make sure the account has been added to user group.
• Make sure the user group name registered on the machine and the group name on the DC (domain
controller) are exactly the same. The DC is case sensitive.
• Make sure that "Use Auth. Info at Login" has been specified in "Auth. Info" in the user account
registered on the machine.
• If there is more than one DC, make sure that a confidential relationship has been configured
between each DC.
W0400-107 : Case 3
The domain name cannot be resolved.
• Make sure that DNS/WINS is specified in the domain name in "Interface Settings".
W0400-200
Due to the high number of authentication attempts, all resources are busy.
• Wait a few minutes and then try again.
W0400-202 : Case 1
The SSL settings on the authentication server and the machine do not match.
• Make sure the SSL settings on the authentication server and the machine match.
W0400-202 : Case 2
The user entered sAMAccountName in the user name to log in.
• If a user enters sAMAccountName as the login user name, ldap_bind fails in a parent/subdomain
environment. Use UserPrincipleName for the login name instead.
W0406-003
An authentication error occurred because the user name contains a space, colon (:), or quotation mark
(").
• Recreate the account if the account name contains any of these prohibited characters.
• If the account name was entered incorrectly, enter it correctly and log on again.
W0406-101
Authentication cannot be completed because of the high number of authentication attempts.
• Wait a few minutes and then try again.
• If the situation does not return to normal, make sure that an authentication attack is not occurring.
• Notify the administrator of the screen message by e-mail, and check the system log for signs of an
authentication attack.
W0406-107 : Case 1
Cannot connect to the authentication server.
276