Ricoh MP C6502 series Operation Manual page 516

7. Managing the Machine
Log ID
Identifies the ID that is assigned to the log. This is a hexadecimal ID that identifies the log.
Power Mode
The power status of the machine (after state transition) is logged.
Standby
Low Power
Silent
HDD On
Engine Off
Controller Off
STR
Silent Print
Low Power Print
Fusing Unit Off
Log Type
The type of job log is recorded.
Job Interval (seconds)
Indicates the elapsed time from the start of the previous job to the start of the present job.
Job Duration (seconds)
Indicates the elapsed time from the start of a job to its end.
Paper Usage (Large Size)
Indicates the number of one-sided prints per hour on large paper.
Large size means A3 (11 × 17 inches) or larger.
Paper Usage (Small Size)
Indicates the number of one-sided prints per hour on small paper.
Small size means smaller than A3 (11 × 17 inches).
Paper Usage (2 Sided: Large Size)
Indicates the number of two-sided prints per hour on large paper.
226
Value
Standby status
Low power status
Silent status
HDD on status
Engine off status
Controller off status
STR status
Silent print status
Low power print status
Fusing unit off status
Content