3. Photoconductor Unit
Before You Begin
• The surface of a drum is sensitive to light.
• Exposing the surface of a drum to strong light (especially direct sunlight) can permanently damage
it.
What You Need
• Hex screwdriver
• Newspaper or other paper
• Photoconductor stand
The stand is in the box at the bottom of the machine or on the back of the finisher.
Replacement Message
• "Replacement Required:Cleaning Unit for Photoconductor Unit"
"Black, Cyan, Magenta, Yellow"
The color corresponding to the unit that needs to be replaced appears.
• "Replacement Required:Charge Roller Unit"
"Black, Cyan, Magenta, Yellow"
The color corresponding to the unit that needs to be replaced appears.
Print the counter list.
1.
Press the [Counter] key and print out the counter list.
See page 18 "Control Panel".
CWH196
53