At/Atx Mode Selection; At Power Mode; Atx Power Mode; Figure 3-5: At/Atx Switch Location - IEI Technology AFL3-W07A-AL User Manual

3.5 AT/ATX Mode Selection

AT or ATX power mode can be used on the AFL3-W07A-AL. The selection is made
through an AT/ATX switch located on the bottom panel (Figure 3-5).

Figure 3-5: AT/ATX Switch Location

3.5.1 AT Power Mode

With the AT mode selected, the power is controlled by a central power unit rather than a
power switch. The AFL3-W07A-AL panel PC turns on automatically when the power is
connected. The AT mode benefits a production line to control multiple panel PCs from a
central management center and other applications including:
ATM

Self-service kiosk

Plant environment monitoring system

Factory automation platform

Manufacturing shop flow


3.5.2 ATX Power Mode

With the ATX mode selected, the AFL3-W07A-AL panel PC goes in a standby mode when
it is turned off. The panel PC can be easily turned on via network or a power switch in
standby mode. Remote power control is perfect for advertising applications since the
broadcasting time for each panel PC can be set individually and controlled remotely. Other
possible application includes
Security surveillance

Point-of-Sale (POS)

Advertising terminal

Page 18
AFL3-W07A-AL Panel PC