Expert Adjustment>Timing Adjustment - Konica Minolta bizhub Pro 920 User Manual

Utility <Administrator Setting>
6 Expert Adjustment>Timing Adjustment
!
Detail
By default, the Timing Adjustment key is not displayed. Contact your
service representative.
Use this function to set the following items for timing adjustment when print-
ing or scanning.
Printer Top Margin Adjustment
-
Adjust the top margin.
Available range: =30 (wide) to +30 (narrow), 1 step = 0.1mm
- Printer Regist Loop Adjust
Adjust the amount of registered loop based on a paper feed tray (trays 1
to 4), a bypass tray, and ADU.
Available range: -10 (wide) to +10 (narrow), 1 step = 1mm
Tray Side 1: Available range: -5 (wide) to +5 (narrow), 1 step = 1mm
- Printer Pre-Regist
Adjust the amount to pre-register based on a paper tray (trays 1 to 4), a
bypass tray, and ADU.
Available range: -10 (wide) to +10 (narrow), 1 step = 1mm
Tray 1 to 4: Available range: -5 (wide) to +5 (narrow), 1 step = 1mm
- Lead Edge Margin Selection
Adjust the amount of image erase from the edge of the sheet.
Available range: -20 (wide) to +40 (narrow), 1 step = 0.1mm
- Top Image (Original Glass)
Adjust the restart timing in scanning the original with the original glass.
Available range: -40 (fast) to +40 (slow), 1 step = 0.1mm
- Top Image (ADF)
Adjust the restart timing in scanning the original with ADF.
Available range: -50 (fast) to +50 (slow), 1 step = 0.1mm
- Scanner (ADF) Regist Loop Adjust
Adjust the amount of registered loop in scanning the original with ADF.
Available range: -10 (short) to +10 (long), 1 step = 0.5mm
1
Press the [Utility/Counter] to display the Utility Screen.
2
Touch [6 Administrator Setting], enter the administrator password, and
then touch [OK].
The Administrator Setting Screen will be displayed.
bizhub PRO 920
18
18-51