Konica Minolta bizhub Pro 920 User Manual page 452

16
– Use the control panel keypad to enter the time, then touch [Set].
The available range is from 10 to 300. When the time outside this
range is entered as touching Set, the time initially entered is desig-
nated.
If the wrong number is entered before touching [Set], touch [Reset]
to re-enter the correct number.
5
Touch [Return]. The Controller Setting Screen will be restored.
6
If further changes are required, touch the desired key.
Touch the [Utility] to complete the setting and restore the Utility Screen.
16-22
Controller Setting
bizhub PRO 920