Selecting Exposure Level And Adjusting Background Whiteness - Konica Minolta bizhub Pro 920 User Manual

Basic Job Settings
9.2 Selecting Exposure Level and Adjusting Background
Whiteness
Automatic Exposure (AE) operates with the default settings. It detects the
density of the original image and automatically selects the appropriate expo-
sure for the copy.
Select manual copy density to adjust exposure (density) when originals are
too light or too dark.
Adjust also the background whiteness when copying newspaper or recycled
paper originals.
Light original
!
Detail
User Density programs the desired density selected among 16 exposure
levels divided from the darkest level to normal level, and normal level to
the lightest level, respectively.
This setting can be made by the administrator. For details, refer to "3
Density Setting>2 User Density Setting" on page 17-35.
To recall the programmed density, follow the procedure below.
Density Shift can shift each of nine density levels described below to
three levels lighter or three levels darker.
This function can be set by the administrator to use in combination with
each of four Original Type modes. For details, refer to "3 Density Set-
ting>3 Photo Mode Density Setting" on page 17-38.
bizhub PRO 920
Normal
9
Dark original
9-7