Konica Minolta bizhub Pro 920 User Manual page 381

Job Management
2
Select the desired job, then select the job operation.
– To clear reserve job:
Touch to highlight the desired reserve job key, then touch [Delete].
Touch [Yes] on the popup menu to clear the selected job. All the
data of the selected job will be cleared
– To specify the next job to be printed:
Touch to highlight the desired reserve job key, then touch [Increase
Priority]. The highlighted reserve job will be moved just under the
current print job.
This will not function if printing operation has already been started
for the selected job.
– To change the order of jobs:
Touch to highlight the desired reserve job key, then touch [Priority].
The highlighted job will be advanced by one in printing order unless
the job preceding the selected one is already in progress.
If printing order cannot be changed for the selected job, a message
will be displayed for information.
– To suspend reserve job:
Touch to highlight the desired reserve job key, then touch [Sus-
pended]. Printing operation for the selected job will be suspended
and kept stored in memory.
In this case, "Suspended" will be displayed in the Status area of the
suspended job key to prompt you that a suspended job remains in
the machine. Touch the job key to resume printing operation. See
"To Check/Operate Suspended Jobs" on page 13-9 for details.
– To check the settings of reserve job:
Touch to highlight the desired reserve job key, then touch [Details].
Check the settings of the selected job on the screen. Touch [Close]
to return to the Job List Screen.
bizhub PRO 920
13
13-5