Konica Minolta bizhub Pro 920 User Manual page 277

Applications
5
Select the desired Repeat mode, then touch [OK].
– Touch [2], [4], or [8] to select the desired Repeat mode.
– If you want the image upside down on the other side in 2 Repeat
mode, touch [R-Reverse] or [L-Reverse].
6
Touch [OK] on the Image Repeat Screen.
Do you want to cancel changes to the settings?
?
% Touch [Cancel].
Do you want to cancel the Image Repeat function?
?
% Touch [Off].
7
Touch [OK] to restore the Application Screen.
8
Touch [Basic] to restore the Basic Screen, then select the desired mag-
nification and paper size.
9
Enter the desired print quantity from the control panel keypad.
10
Position original.
– For Size Auto Detect mode original, open the document feeder,
then position the original FACE DOWN on the original glass. In this
case, DO NOT close the document feeder.
– For 2 Repeat, 4 Repeat, or 8 Repeat mode original, ADF is also
available.
11
Press [Start].
bizhub PRO 920
11
11-39