Konica Minolta bizhub Pro 920 User Manual page 628

18
Specific setting and Description
TCP/IP RAW port settings (1 to 6)
Specify RAW port numbers and to be used or not.
Use/Not Use
(Set between 1 - 65535.)
TCP/IP Filter accept settings *1 *2
Specify to use the accept settings or not, and the range in
which to permit connections.
On/Off
0.0.0.0 - 0.0.0.0 (0 - 255)
TCP/IP Filter refuse settings *1 *2
Specify to use the refuse settings or not, and the range in
which to deny connections.
On/Off
0.0.0.0 - 0.0.0.0 (0 - 255)
Network Test Ping Address
Perform ping.
Max. 255 characters combining symbols and alphanumer-
ics can be used.
*1: If the range of the permission setting is the same as that of the denial setting, the latter setting
overrides the former.
*2: The functions that are affected by the permission and denial settings are as follows:
HTTP servers (PSWC, IPP), HTTP servers (PSWC with SSL), printing over the network (LPD,
RAW Port, SMB), FTP servers (access to Scan to HDD jobs), SNMP
Specify the settings for connecting network printer, and the NetWare set-
tings. For details, refer to page 18-126.
Specific setting and Description
2 NetWare
NetWare
NetWare
If [Use] is selected, Novell NetWare (IPX/SPX) is ena-
bled as the print server protocol.
Use/Not Use
Frame Type
Select the frame type.
Auto Detect/IEEE802.2/IEEE802.3/Ethernet2/
IEEE802.2SNAP
Operating Mode
Select the required operation mode.
Pserver/Nprinter/Rprinter
18-108
Utility <Administrator Setting>
Default
Use
Off
Off
- - -
Default
Not Use
Auto Detect
Pserver
bizhub PRO 920