Finisher Fs-604 (+ Punch Kit Pk-504/505) - Konica Minolta bizhub Pro 920 User Manual

Preparation for Use

Finisher FS-604 (+ Punch Kit PK-504/505)

No. Name
1 Finisher door
2 Folding mode outlet
3 Folding mode tray
4 Exit paper guide
5 Primary (main) tray
6 Secondary (sub) tray
bizhub PRO 920
4 5
1
6
3 2
Description
Opens to the internal finisher to allow replenishing
staples and clearing mishandled paper, and also to
allow removal of waste paper punched out when
Punch kit PK-504/505 is installed.
Delivers sets output in Half Fold, Fold&Staple, Let-
ter Fold In, or Letter Fold Out mode.
Holds sets output in Half Fold, Fold&Staple, Letter
Fold In, or Letter Fold Out mode.
Used to hold paper to prevent it from being curled
excessively. Normally stored in the guide holder on
the back of the finisher.
Holds sets output in the selected finishing mode
other than specified above.
Holds sets output in Sort, Group, Face Up, or Face
Down mode.
2
Finisher FS-604
2-13