Expert Adjustment>Finisher Adjust - Konica Minolta bizhub Pro 920 User Manual

Utility <Administrator Setting>
6 Expert Adjustment>Finisher Adjust
!
Detail
Selectable items may differ depending upon the configuration of the ma-
chine options being installed.
Use this function to set the following items for finisher adjustment.
Fold & Staple Stopper Adjustment
-
Adjust the dislocation of the centre position of staples for the Finisher
FS-604.
Available range: -128 (wide) to +127 (narrow), 1 step = 0.1mm
- Half fold Stopper Adjustment
Adjust the dislocation of the half fold position for the Finisher FS-604.
Available range: -128 (wide) to +127 (narrow), 1 step = 0.1mm
- Trimming Stopper Adjustment
Adjust the trim width for the Trimmer Unit TU-501.
Available range: -128 (wide) to +127 (narrow), 1 step = 0.1mm
- Hole-Punch Adjustment
Adjust the dislocation of the punch position for the Punch Kit PK-504/505
and the Z-Fold Unit ZU-601/602.
Punch Kit Vertical Position Adjustment: Available range: -50 (wide) to +50
(narrow), 1 step = 0.1mm
Punch Kit Horizontal Position Adjustment: Available range: -50 (wide) to
+50 (narrow), 1 step = 0.1mm
Punch Unit Vertical Position Adjustment: Available range: -50 (wide) to
+50 (narrow), 1 step = 0.1mm
Punch Unit Horizontal Position Adjustment: Available range: -50 (wide) to
+50 (narrow), 1 step = 0.1mm
- Z-Fold Position Adjustment
Adjust the dislocation of the z-fold position for the Z-Fold Unit ZU-601/
602.
1st Fold Adjustment: Available range: -128 (wide) to +127 (narrow), 1 step
= 0.1mm
2nd Fold Adjustment: Available range: -128 (wide) to +127 (narrow),
1 step = 0.1mm
- Letter Fold Adjustment
Adjust the dislocation of the three-fold position for the Finisher FS-604.
Available range: -128 (wide) to +127 (narrow), 1 step = 0.1mm
- 2 Positions Staple Pitch Adjustment
Adjust the dislocation of the 2 positions stapling pitch for the Finisher
FS-604.
Available range: 120 (wide) to 160 (narrow), 1 step = 1mm
- Fold & Staple Staple Pitch Adjustment
Adjust the centre staple and fold-staple pitch for the Finisher FS-604.
Available range: 120 (wide) to 160 (narrow), 1 step = 1mm
bizhub PRO 920
18
18-47