To Set Finishing Mode - Konica Minolta bizhub Pro 920 User Manual

12

To set finishing mode

0 A machine with Finisher installed is set to output to the primary (main) tray
in Sort mode by default.
0 Setting copy conditions restricted to use secondary (sub) tray or Folding
mode tray will switch the tray selection automatically.
1
Touch [Finishing] on the Basic Screen.
The Finishing setting menu will be displayed.
2
Specify the output tray.
– Touch [Main Tray] or [Sub Tray] to highlight it.
3
Select Sort or Group, and set Offset to use offset output.
– To set Sort mode, touch [Sort] to highlight it.
– To set Group mode, touch [Group] to highlight it.
– To use Offset mode in combination with Sort or Group mode, touch
[Offset] to highlight it.
12-14
Finishing / Paper Fold
bizhub PRO 920