Konica Minolta bizhub Pro 920 User Manual page 427

Paper Setting
10
Select Standard size when loading the standard size of paper in the
specified tray.
– Touch [Standard Size] to highlight it.
– If selected tray will be loaded with one of the following sizes, touch
[Original Size Detection] to display the Original Size Detection
Screen, and then touch the desired size key.
If 5.5×8.5 is selected on the Original Size Detection Screen, the ma-
chine will automatically detect 5.5×8.5 instead of A5. Similarly,
8.5×11R will be detected instead of A4R, 8.5×14 will be detected
instead of 8.5×13.
Touch [OK] to complete the setting and return to the Size Setting
Screen.
11
Select [Custom Size] when setting loading the custom size of paper in
the specified tray.
– Touch Custom Size to display the custom Size Setting Screen.
– Touch [X] indicating the horizontal size, then enter the desired size
using the control panel keypad. Similarly, touch [Y] indicating the
vertical size, then enter the desired size. From the minimum size of
140×182 mm to the maximum size of 314×445 mm can be set.
bizhub PRO 920
15
15-15