Logging In Using Administrator Mode - Konica Minolta bizhub Pro 920 User Manual

20

20.3.1 Logging in Using Administrator Mode

By logging into PageScope Web Connection in Administrator Mode, you can
configure or confirm the image controller system.
!
Detail
The default value of the administrator password for PageScope Web
Connection is 00000000.
You can change the administrator password for PageScope Web Con-
nection using the browser in the [System] area of Administrator Mode.
See "Administrator Mode" on page 20-10. You can also change it using
the touch panel of the main body. Contact your service store for details.
In order to ensure the security against data used in Administrator Mode,
set SSL. SSL can be set on the [Network] tab of Administrator Mode. For
the details on the SSL setting, see page 20-42.
20-8
PageScope Web Connection Setting
bizhub PRO 920