Loading Paper In Tray 1, 2, And 3 - Konica Minolta bizhub Pro 920 User Manual

Supplies & Handling

Loading Paper in Tray 1, 2, and 3

The main body trays are universal and paper size can be readily changed
when supplying paper.
0 Be sure that the machine is powered ON before withdrawing the tray.
0 Only one tray can be withdrawn at a time.
1
Withdraw the tray to be supplied with
paper.
– Be sure to withdraw the tray
completely until it stops.
2
Open the paper feed roller.
3
Place paper on the tray with any curl
turning up, then move the side guide
plates and rear guide to the edge of
the paper.
– Load paper aligning it to the pa-
per feed roller side of the tray.
Press the release knob of the
front side guide plate to move the
side guide plates, and also move the rear guide to the edge of the
paper.
4
When paper is seated properly, close the paper feed roller.
5
Push in the tray until it locks into place.
bizhub PRO 920
4
4-5