Konica Minolta bizhub Pro 920 User Manual page 566

18
5
Touch [ADF Frame Erasure Setting].
The Job Setting Screen of the ADF Frame Erasure Setting is displayed
on the rightside.
6
Touch [On] if setting the outside area. Enter the desired amount of out-
side area to be deleted. The amount of outside area to be set is be-
tween 1 to 5mm; entering a value above 6 mm is invalid.
Touch [Off] if deleting the outside area is not necessary.
The setting is enabled when it is set.
7
Touch [OK] to return to the Expert Adjustment Screen.
8
If further changes are required, touch the desired key.
Touch [Utility] to restore the Utility Screen.
18-46
Utility <Administrator Setting>
bizhub PRO 920