To Cancel The Job On The Tandem Machine Only - Konica Minolta bizhub Pro 920 User Manual

Hide thumbs Also See for bizhub Pro 920:

Table of Contents

To cancel the job on the tandem machine only

Press [Stop] on the control panel of the tandem machine.

The tandem machine stops the current operation immediately, and the

popup menu appears on the Basic Screen of the tandem machine to

ask you whether to continue or cease the operation. At this time, the

tandem mode is not yet released.

Touch [Continue] to go on, or [Stop Job] to delete all the data transmit-

ted from the master machine and to release the tandem mode.

The master machine will take over the remaining print quantity and

complete the job.

If temporary suspension in the tandem machine takes a long time, the

Distribution recovery mode will activate, enabling the master machine to

handle the remaining print quantity.

Once the Distribution recovery mode is activated and the master ma-

chine is already handling the remaining print quantity, the tandem ma-

chine cannot continue with the tandem printing job, even when

[Continue] is touched.

Finishing / Paper Fold

bizhub PRO 920