6
Do you want to exit Utility mode and return to the previous screen?
?
% Touch [Exit].
2
Touch [Details].
The PM count, Developer count, and Drum count will be displayed.
3
Print the counter list, if desired.
–
Touch [Copy]. The Basic Screen will be displayed.
–
Select the desired copy mode, then press [Start].
After the counter list is printed out, touch [Counter Output] to return to
the previous screen.
!
Detail
The Developer count and Drum count can be selected to indicate either
the cycle count or runtime count. Contact your service representative, if
desired.
6-6
Maintenance
bizhub PRO 920