Konica Minolta bizhub Pro 920 User Manual page 351

Finishing / Paper Fold
Note
If no other settings are required, you don't have to touch [OK] to restore
the Basic Screen. Position originals, then press [Start] to start the printing
job.
If the Finisher FS-509 is mounted with 100-sheet-staple cartridges and
[Stop] is pressed to cease the printing job in Staple mode, the number of
printed sheets in the last sorted/grouped set determines to staple or not
to staple the unfinished set(s).
50 sheets or less: Unfinished set(s) will not be stapled upon exit.
51 sheets or more: Unfinished set(s) will be stapled upon exit.
Reminder
The primary (main) tray gradually goes down while printed materials out-
put. DO NOT allow any object to interfere with the operation of the tray
on the left side of the finisher, as any interference may cause damage to
the finisher.
bizhub PRO 920
12
12-17