Konica Minolta bizhub Pro 920 User Manual page 458

17
Specific setting and Description
5 Tandem Setting
1 Tandem Sub Machine One Time Data Read
Set the sub machine to receive all the data transmitted
from the master machine before starting to print.
On/Off
2 Tandem Sub Machine Wait/Proof
Set the master machine to transmit the data to the sub
machine at the time when the master machine starts
scanning the data for proof copying.
Permit/Prohibit
3 Tandem Sub Machine Shift Data Setting
Set the sub machine to use the same shift value used
on the master machine.
Master Machine Shift data/Sub Machine Shift data
4 Tandem Selection after JOB completion
Select to continue or release the tandem mode after the
current tandem job is completed.
Continue/Release
5 Distribution Recovery
Set the tandem-connected machines to perform the
job distribution again for print quantity remaining on
one machine when the other has already finished with
its assignment.
On/Off
17-6
Utility <User Setting>
Default
Off
Permit
Master Machine Shift data
Release
On
bizhub PRO 920