Utility <Administrator Setting>
7
Specify the Trans Address Setting.
Touch [Trans Address Setting] on the SNMP Trap Setting Screen, then
touch the desired key from 1 to 5 of transmission address setting to
display the SNMP Trap Trans Address Setting Screen.
Specify the following items, using up/down arrow as required.
Touch [OK] to complete the settings.
–
Address SNMP Trap Trans
–
SNMP Trap Trans Address
–
SNMP Trap Trans Port No.
–
Trans Community Name
–
Report Items: Select the desired report items. More than one item
can be selected.
Touch [Clear All] if none of them are required. However, the authen-
tication failure transmission will be performed even if all report
items are cleared.
bizhub PRO 920
18
18-177