Konica Minolta bizhub Pro 920 User Manual page 61

Preparation for Use
Warmup takes approx. 5.5 minutes.
During warmup, the message "Ready to copy reserve" will be dis-
played in the message area of the Basic Screen.
When printing job becomes available, the message "Ready to copy"
will be displayed.
Note
If the initial settings are changed by the administrator, the modified con-
ditions will be displayed on the Basic Screen.
If a key counter or copy card is required, follow the instruction on the
screen.
!
Detail
While the machine is warming up, you can select copy conditions and
start scanning so that the machine may start printing immediately the
machine engine is ready. See "Setting Job During Warmup" on
page 8-18 for details.
User Authentication or Account Authentication may be required to oper-
ate the machine. See "Making Authentication" on page 2-30 for details.
Administrator can set the machine to display seven types of warmup
screen during warmup. For details, refer to "8 Warm Up Screen On/Off"
on page 17-24.
bizhub PRO 920
2
2-23