To Change A User Data - Konica Minolta bizhub Pro 920 User Manual

User Authentication in Enhanced Security Mode
24.3

To change a user data

Follow the procedure below to change a user data (user name and password)
once registered.
!
Detail
Passwords are case sensitive.
If a wrong password or fewer than 8 alphanumerical characters are en-
tered and the [OK] is touched, the warning message "Password does not
match" will appear, and no key will work for five seconds. Enter the right
password after five seconds.
The current password cannot be used again.
If authentication fails, the information will be saved in the audit log.
1
Press [Utility/Counter] on the control
panel.
The Utility Screen will be displayed.
2
Touch [6 Administrator Setting].
The Input Administrator Password Screen will be displayed.
bizhub PRO 920
24
24-9