CARBURETED ELECTRICAL
SYSTEMS
EC50PL Stator Specifications
NOTE: Use a multimeter to test the stator circuits.
Remember to test the circuits when the engine is
cold and after the engine has been running for some
time.
Specifications
BRN / WHT TO BLK / RED
YELLOW TO YEL / RED
YEL / RED, WHT, BRN TO GROUND 0Ω
EC34 / EC55 Stator Specifications
NOTE: Use a multimeter to test the stator circuits.
Remember to test the circuits when the engine is
cold and after the engine has been running for some
time.
Specifications
YEL TO BRN
BRN TO ENGINE
BLK / RED TO GRN
RED TO GRN
RED TO ENGINE
BLK TO ENGINE
WHT / RED TO WHT
WHT TO ENGINE
500cc EV / 600 HO Stator Specifications
NOTE: Use a multimeter to test the stator circuits.
Remember to test the circuits when the engine is
cold and after the engine has been running for some
time.
Specifications
YEL TO BRN
BRN TO ENGINE
BLK / RED TO GRN
RED TO GRN
BLK or WHT TO ENGINE
WHT / RED TO WHT
164 Ω
0.2 - 0.5Ω
0.16Ω
0Ω
13Ω
13Ω
OPENΩ
0Ω
185Ω
OPENΩ
0.15Ω
0Ω
15Ω
15Ω
0Ω
185Ω
BATTERY & ELECTRICAL SYSTEMS
Ignition Coil Packs
NOTE: Specifications listed for all models except
EC50PL (488cc) as this model features a CDI / coil
pack.
Specifications
BLK TO WHT (Primary)
BLK or WHT TO SECONDARY LEAD OPENΩ
SECONDARY LEAD TO LEAD
PLUG CAPS
Exhaust Valve Solenoid
Specifications
Coil Resistance
(WHT/YEL to RED)
Knock Sensor
0.3Ω
5KΩ
10KΩ
15Ω +/- 15% @ 68°F (20°C)
11.47
11
Need help?
Do you have a question about the 2007 Two Stroke and is the answer not in the manual?
Questions and answers