Konica Minolta bizhub C353 Service Manual page 287

8. Utility Mode
(6) Color Registration Adjust
• It will not be displayed when the following setting shows that Management Device 1 is
mounted during the device power is OFF or no authentication is set.
[Service Mode] → [Billing Setting] → [Management Function Choice]
• This menu is unavailable when the key counter is not inserted while only the key counter
is set to Set by [Service Mode] → [Billing Setting] → [Management Function Choice].
<Color Registration Adjust (Yellow, Magenta, Cyan)>
Functions • To adjust color shift if there is any when comparing the original with copy of the plain
or thick paper.
Use • To correct any color shift.
• Able to make an individual adjustment for each paper type of plain paper, thick 1,
thick 2, thick 3 and thick 4.
Adjustment
Range
Adjustment If the cross deviates in the direction of A, increase the setting.
Instructions If the cross deviates in the direction of B, decrease the setting.
Setting/ 1. Call the Administrator Settings to the screen.
2. Touch [System Settings] → [Expert Adjustment] → [Color Registration Adjust].
Procedure
3. Load tray 1 with A3/11x17 or A4/8
4. Press the Start key.
5. On the test pattern produced, check for deviation between the black line and the line
of each color at positions X and Y.
6. Select the color to be adjusted.
7. Using the [+] / [-] key, change the setting value as necessary. (At this time, only the
line of the selected color moves.)
8. Produce another test pattern and make sure that there is no deviation.
Check Procedure
Check point X, Y
Adjustment for X direction:
Check point X
Adjustment for Y direction:
Check point Y
242
"0" (-6 to +6 dot)
Direction of A
A02EF3C502DA
Direction of A
A02EF3C504DA
Field Service Ver. 4.0 Jun. 2008
/ x11 normal paper.
1
2
If the cross deviates in the direction of A,
increase the setting.
If the cross deviates in the direction of B,
decrease the setting.
Direction of B
If the cross deviates in the direction of A,
increase the setting.
If the cross deviates in the direction of B,
decrease the setting.
Direction of B
A02EF3C501DA
A02EF3C503DA
A02EF3C505DA