Stapler; Saddle Section - Konica Minolta bizhub C353 Service Manual

2. Other
2.3.10

Stapler

[1]
[2]
[1]
2.3.11

Saddle section

1. Remove the front cover.
See P.7
2. Remove the rear cover.
See P.8
3. Remove the punch dust box.
[2]
[4]
14
[3]
[2]
A0D6F2C518DA
A0D6F2C519DA
[3]
[5]
[1]
A0D6F2C520DA
Field Service Ver. 2.0 Jan. 2008
1. Open the front door [1].
2. Pull out the stapler [3] while pressing
the stop lever [2].
NOTE
• Do not remove the stapler from the
shaft of the stapler frame, or dis-
placement will be caused between
the position to which the staple
driver [1] (the lower unit of the sta-
pler) feeds staples and the position
from which the staple clincher [2]
(the upper unit of the stapler)
receives them.
4. Open the jam access cover [1],
remove two screws [2], and remove
the right stay [3].
5. Remove two screws [4], and remove
the lever [5].