7. Mechanical adjustment
7.5
Read Pos Adj
NOTE
Make this adjustment after any of the following procedures has been performed.
• When the first/second carriage, the scanner wire, the scanner assy, the original
glass moving unit, and/or the glass step sheet have been replaced.
A. Auto adjust
1. Call the Service Mode to the screen.
See P.338 of the main body service manual.
2. Touch [ADF].
3. Touch [Read Pos Adj].
4. Touch [Auto Adjust].
[1]
46
5. Open the ADF.
6. Place the ADF reading chart [1] so
7. Press the Start key.
NOTE
• Be sure that the ADF reading chart
is in position.
• Keep the automatic document
feeder open while making the
adjustment.
A01HF3C003DA
Field Service Ver. 2.0 Jan. 2008
that a triangular mark may become
the original glass side (downward)
and the pointed tip of the triangle
points toward the black sheet on the
left side.
A01HF3E536DA