Split Line Detect. Setting - Konica Minolta bizhub C353 Service Manual

Field service

Hide thumbs Also See for bizhub C353:

Table of Contents

10. Service Mode

8. Using the "get" command, transfer the data for capture to PC.

9. Finish the command prompt.

• After receiving capture data, select [Administrator Settings] → [Security Set-

tings] → [Security Details], and select [Restrict] for print data capture in order

to delete the job data stored in the hard disk.

When HDD Format or Overwrite Temporary Data is performed, job data is

Split Line Detect. Setting

A. Prior Detection

• To set the detection level for the pre-detection of stain on the ADF original glass.

• Use when changing the setting for whether or not to detect the stain on the ADF orig-

inal glass when opening/closing ADF as well as its detection level as the main/sub

power being ON, recovering from the sleep/low power mode, etc.

• Be aware that selecting "Not Set" and performing the pre-detection with the

following setting will display "NG."

[Service Mode] → [Machine] → [Thin Line Prior Detection]

• When "Not Set" is selected, the original glass cleaning operation after the job

ends does not operate.

• The default setting is "Normal."

: Detection of stain on the glass will not be conducted.

: Stain on the glass will not be detected easily.

: Normal level detection.

: Stain on the glass will easily be detected.

Field Service Ver. 4.0 Jun. 2008

4037F3E542DA

Show Quick Links

Table of Contents

Bizhub c253 Bizhub c203