Konica Minolta bizhub C353 Service Manual page 788

Field Service Ver. 2.0 Jan. 2008
C. Auto adjust: Main Scanning Direction Image scan start position
1. Call the Service Mode to the screen.
See P.338 of the main body service manual.
2. Touch [ADF].
3. Touch [Auto Stop Position Adjustment].
4. Touch [Main Scanning Direction].
7. Make sure that result is OK. Then,
8. Touch [END].
9. Touch [Exit] on the Service Mode
10. Turn OFF the main power switch,
NOTE
If the result is Unable:
• Check and correct the skew of the
document.
A01HF3E530DA
• Manually correct the value of [Origi-
nal Stop Position].
7. Mechanical adjustment
touch [SET].
screen.
wait for 10 sec., then turn the switch
ON.
See P.40
A01HF3E528DA
39