Konica Minolta bizhub C353 Service Manual page 1139

6. Mechanical adjustment
[3]
[2]
[1]
[2]
[3]
50
16. Set the timing belt [1] to the gear [2]
[2]
[1]
A0D6F3C523DA
17. Install the staple position confirm
[1]
NOTE
• The position in which the blue mark
meets face to face with the hole is
the home position for stapling. If
[3]
the staple jam release gear is
turned for some reason, this home
position will shift and the staple
cartridge will not come off. In this
A0D6F3C524DA
case, the staple position confirm
gear plays a role of resuming the
stapling home position by referring
to the blue mark. Therefore, the
gear should be set in place cor-
rectly.
18. Remove the pin fixing the gear and
[4]
19. Set the spring [1], the spacer [2], the
[5]
[6]
A0D6F3C525DA
Field Service Ver. 2.0 Jan. 2008
and gear [3] with the gear and the
cam in the fixed condition.
gear [3] in such a way that the blue
mark [1] of the gear comes face to
face with the hole [2] in the frame.
the cam to release them.
staple jam release gear [3], the tim-
ing belt [4] and the middle gear 1 [5],
and fix them with two E-rings [6].