Crease Unit - Konica Minolta bizhub C353 Service Manual

Field Service Ver. 2.0 Jan. 2008
3.3.5

Crease unit

1. Remove the saddle unit.
See P.7
2. Remove the finisher unit.
See P.28 of the FS-519/PK-515/OT-602 service manual.
[1]
[2]
[1]
[1]
[2]
[1]
[3]
4511F2C560DA
[1]
4511F2C561DA
[3]
[2]
4511F2C562DA
3. Remove four screws [1] and remove
the finisher unit rear cover [2].
4. Disconnect the connector [3].
5. Remove three screws [1] and
remove the finisher unit upper cover
[2].
6. Remove two screws [1] and remove
the finisher unit right front cover [2].
NOTE
• At reinstallation, first fit the tab [3]
into position.
3. Other
9