Konica Minolta bizhub C353 Service Manual page 268

Field Service Ver. 4.0 Jun. 2008
(7) Binding Direction Adjustment
Functions • Specifies the alignment between the sides of paper (binding position adjustment) in
duplex printing.
Use • To achieve faster printing performance, select Productivity Priority. To address mis-
alignment problems between sides of copies in the horizontal and vertical directions,
select Finishing Priority.
Finishing Priority
Productivity Priority : Able to accelerate print speed as sides alignment proceeds
Control Adjustments : Comply with the command from the printer driver and does
Setting/ • The default setting is Finishing Priority.
Procedure
(8) Line Width Adjustment
1
• This is displayed only when the function enhanced version 1 firmware is installed.
Functions • To correct line width of the output data during PC print.
Use • To correct the line width of the output data according to user's needs.
Setting/ • The default setting is Thin.
Procedure
B. Paper Setting
(1) Paper Tray
Functions • To set the paper feed tray when not specified by the printer driver during PC printing.
Use • To use when paper feed tray cannot be specified by the printer driver when printing
from Windows DOS, etc.
Setting/
• The default setting is Auto.
Procedure
(2) Paper Size
Functions • To set the paper size when not specified by the printer diver during printing.
Use • To use when the paper size cannot be specified by the printer driver during printing
from Windows DOS, etc.
(3) 2-Sided Print
Functions • To set whether to carry out duplex print during PC printing when not specified by the
printer driver.
Use • To use when 2-sided printing cannot be specified by the printer driver while printing
by Windows DOS, etc.
Setting/ • The default setting is OFF.
Procedure
: Able to optimize sides aligning operation as the process is
performed after the machine receives all of the print data.
together with data reception and print operation.
not take the side alignment step.
"Finishing Priority"
"Thin"
ON
Productivity Priority
Normal
"OFF"
8. Utility Mode
Control Adjustments
Thick
223
1