Access Point Radio Configuration - Motorola AP-6511 Reference Manual

14.Use the Inbound IP Firewall Rules
to this Virtual Interface.
The firewall inspects and packet traffic to and from connected clients.
If a firewall rule does not exist suiting the data protection needs of this Virtual Interface, select the
Create icon to define a new firewall rule configuration or the Edit icon to modify an existing
configuration. For more information, see
15.Select the OK button located at the bottom right of the screen to save the changes to the Security screen.
Select Reset to revert to the last saved configuration.

7.2.3 Access Point Radio Configuration


Profile Interface Configuration
An AP-6511 model Access Point can have its radio configurations modified by a connected controller once
its radios have successfully associated to the network. Take care not to modify an Access Point's
configuration using its resident Web UI, CLI or SNMP interfaces when managed by a profile, or risk the
Access Point having a configuration independent from the profile until the profile can be uploaded to the
Access Point once again.
To define a Access Point radio configuration:
1. Select Configuration
2. Expand the Interface menu to display its submenu options.
3. Select Radios.
Figure 7-8 Virtual Interfaces - Security screen
drop-down menu to select the firewall rule configuration to apply
Wireless Firewall on page
> Profiles > Interface.
Profile Configuration
8-2.
7-15