Motorola AP-6511 Reference Manual page 258

Access point
Hide thumbs Also See for AP-6511:
Table of Contents

Advertisement

Motorola Solutions AP-6511 Access Point System Reference Guide
5. Refer to the
Firewall is enabled by default.
If disabling the Firewall, a confirmation prompt displays stating NAT, wireless hotspot, proxy ARP, deny-
static-wireless-client and deny-wireless-client sending not permitted traffic excessively will be disabled.
6. Refer to the
Enable Proxy ARP
DHCP Broadcast to
Unicast
L2 Stateful Packet
Inspection
8-4
Figure 8-2 Wireless Firewall Policy Configuration screen
Enable Firewall
radio buttons to define the Firewall as either Enabled or Disabled. The
General
field to enable or disable the following Firewall configuration parameters:
Select the radio button to allow the Firewall Policy to use Proxy ARP
responses for this policy on behalf of another device. Proxy ARP allows the
Firewall to handle ARP routing requests for devices behind the Firewall.
This feature is enabled by default.
Select the radio button to enable the conversion of broadcast DHCP offers
to unicast. Converting DHCP broadcast traffic to unicast traffic can help
reduce network traffic loads.This feature is disabled by default.
Select the radio button to enable stateful packet inspection for routed
interfaces within the Layer 2 Firewall. This feature is disabled by default.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents